The FireworX is a very powerful machine, and inside the borders of it's extensive DSP power you can create any imaginable effect. The FireworX' broad palette of effects includes:

Vocoder
Ring modulation
Synth generator
Formant filter
Resonance filter
Multitap delay
Reverse delay
Reverb
Dynamics
Chorus
Flange
Phase
Pitch shift
Fractal noise

You can change the order of the effects, repeat certain blocks, add feedback loops, even insert an external device.

MPN: 950200111

Connectors: XLR balanced (pin 2 hot)

Impedance: 20 kOhm
Max. Input Level: +22 dBu (balanced)
Min. Input Level: -10 dBu
Sensitivity: @ 12 dB headroom: -22 dBu to +10 dBu
A to D Conversion: 24 bit (1 bit, 128 times oversampling)
A to D Delay: 0.8 ms @ 48 kHz
Dynamic Range: >103 dB (unweighted), >106 dB (A)
THD: -95 dB (0,0018%) @ 1 kHz, -6 dBFS (FS @ +16 dBu)
Frequency Response: 10 Hz to 20 kHz: +0/-0.2 dB
Crosstalk: <-80 dB, 10 Hz to 20 kHz, typical -100 dB @ 1 kHz

Analog Outputs

Connectors: XLR balanced (pin 2 hot)
Impedance: 100 Ohm (active transformer)
Max. Output Level: +22 dBu (balanced)
Full Scale Output Range: -10 dBu to +22 dBu
D to A Conversion: 24 bit (1 bit, 128 times oversampling)
D to A Delay: 0.5 ms @ 48 kHz
Dynamic Range: >100 dB (unweighted), >104 dB (A)
THD: -86dB (0.005%) @ 1kHz, -6 dBFS (FS @ +16dBu)
Frequency Response: 10 Hz to 20 kHz: +0/-0.5 dB
Crosstalk: <-60 dB, 10 Hz to 20 kHz, typical -90 dB @ 1 kHz

Digital Inputs and Outputs

Connectors: XLR (AES/EBU), RCA Phono (SPDIF), Optical (Toslink, ADAT),
Formats: AES/EBU (24 bit),S/PDIF (20 bit), EIAJ CP-340, IEC 958, EIAJ Optical (Toslink), ADAT Lite pipe
Output Dither: HPF TPDF dither 8-24 bit
Word Clock Input (Permanent) BNC, 75 Ohm, 0.6 to 10 Vpp
Sample Rates: 44.1 kHz, 48 kHz
Processing Delay: 0.2 ms @ 48 kHz
Frequency Response DIO: 20 Hz to 23,9 kHz +0,01/-0,1 dB @ 48 kHz

EMC

Complies with: EN 55103-1, EN 55103-2 and Class B limits of FCC rules, part 15

PCMCIA Interface

Connector: PC Card, 68 pin type 1 cards
Standards: PCMCIA 2.0, JEIDA 4.0
Card Format: Supports up to 2 MB SRAM

Control Interface

MIDI: In/Out/Through: 5 Pin DIN
GPI, Pedal, Fader: 1/4 inch phone jack

General

Finish: Anodized aluminum face and top plate.
Plated and painted steel chassis
LCD: 56 x 128 dot graphic LCD-display
Dimensions: 19" x 1.75" x 8.2" (483 x 44 x 208 mm)
Weight: 5.2 lb. (2.35 kg)
Mains Voltage: 90 to 240 VAC, 50 to 60 Hz (auto-select)
Power Consumption: <20 W
Backup Battery Life: >10 years

Radio Frequency Immunity/Interference

EMC: Complies with EN 55103-1, EN 55103-2 and Class B limits of FCC rules, part 15

Safety

Certification: Certified to IEC 65, EN 60065, UL 1419

Environment

Operating Temperature: 32 °F to 122 °F (0 °C to 50 °C)
Storage Temperature: -22 °F to 167 °F (-30 °C to 70 °C)
Humidity: Max. 90 % non-condensing

LSYS