ProDesk, is the first truly full-range monitoring system specifically designed for critical mixing and monitoring on the desktop. ProDesk brings the desktop user the same spectral performance as Sky System One, with the only compromise being less output than its bigger brother. ProDesk uses the same revolutionary design technologies that were used in Sky System One. Ultra low distortion, proprietary woofers, superlative Danish tweeters and highly optimized amplifiers specifically designed for this application. ProDesk is the logical evolution of Blue Sky's 2.1 - integrated 3-way system concept and when used with Blue Sky's new BMC, can also offer an extremely high performance 5.1 solution for desktop applications.

Specifications - SAT 5 - Active Satellite
- Solid 3/4" MDF construction with 1" front and rear baffle
- 1/4"x 20 inserts for attachment of OmniMount type 75 brackets.
- Dimensions are 10.88" H x 6.62" W x 10.23" D (11.88" with heatsink & tweeter wave guide)
- Weight 24lbs. / 11kg.

.75" Tweeter
- Dual concentric diaphragm with integral wave guide
- High power ferrite magnet assembly
- Fully video shielded

5.25" Hemispherical Woofer
- Cast aluminum frame
- 1.5" voice coil
- Copper shorting ring
- Aluminum alloy cone
- Fully video shielded
- Vented motor structure

Satellite Amplifier
- Dual 60 Watts into 4-Ohm
-.01% THD + noise at rated power @ 1 kHz
- XLR balanced input
- Adjustable gain control
- B00 optimized crossover
- 80Hz filter bypass switch

General Specifications
- Input Impedance 40k Ohms balanced
- Common Mode Rejection Ratio 40dB typical 60Hz
- Voltage Sensitivity 200mV = 90dB SPL @ 1M
- Maximum Input Level +24dBu balanced
- Frequency Response +/- 1.5dB 200 to 10kHz, +/- 3.0dB 80 to 20kHz
- Low Frequency Cutoff 80Hz
- Internal High Pass Filter 80Hz 2nd order (selectable)
- Internal Crossover 1.8kHz

Specifications - Sub 8 - 8" Active Subwoofer
-.75" MDF with 1" front and rear baffle
- Isolation feet included
- Dimensions: 13" H x 16" W x 13.37" D (15.76" with heatsink and grill)
- Weight 48.5lbs / 22kg

8" Hemispherical Woofer
- 8-inch high excursion woofer
- Vented motor structure
- Cast aluminum frame
- 2.0 " voice coil
- Aluminum alloy cone

Amplifier
- Discrete symmetrical bipolar design
- 100 Watts RMS into 4-Ohm
-.01% THD + noise at rated power @ 100 Hz
- XLR balanced input.
- Adjustable gain control
- B00 optimized crossover
- Voltage Sensitivity 100mv=90dB SPL@1m
- Frequency Response (direct IN-anechoic) 35 to 200Hz
- Typical in room response (direct IN ) 20 to 200Hz (1500 cubic feet)

Bass-Management
- Input impedance 20K balanced
- Common mode rejection 40dB typical @ 60Hz
- Maximum Input Level +24dBu balanced
- Output Impedance 200 Ohms balanced
- Nominal gain 0dB
- High Pass filter None (built into SAT 5)
- Low Pass filter 80Hz 4th order
- Direct In low pass filter None