"The Globe" Series of cardioid studio microphones are designed for world-class recording situations where sound quality and musical character is of utmost importance. "The Globe Standard" is tuned for a classic, wide-spectrum microphone sound ideal for instrument or orchestral applications. "The Globe Vintage" uses a different dual-diaphragm capsule providing a sweet and warm, vintage vocal microphone sound.

Both models utilize an isolated spherical head assembly constructed of brass mesh for maximum acoustical transparency. The large dual-diaphragm true electrostatic condenser capsules use the highest quality 6-micron Mylar film. The diaphragms are tensioned and adjusted on precisely- made brass backplates and sputtered with a special-formula gold mixture. This process gives a faster impulse transient response without sound coloration or low-frequency reduction and adds the ability to handle louder sound pressure levels.

The internal solid state preamplifier of the microphone is a Class ’A’ fully discrete transformerless circuit, built using only the highest quality components. The circuit is designed to achieve the highest audio standards and provides a flat frequency response, high dynamics, low self-noise, and very low audio distortion of all types. "The Globe" should be used with high quality, regulated 48V phantom power. Rugged microphone construction and 2 internal shockmounts (one for the capsule and one for the electronics) effectively reduce stand rumble, outside infrasonic interference and mechanical shocks.

- Diaphragm’s Diameter (inch/mm): 1"/26 mm
- Polar Pattern: Cardioid
- Output Impedance: 50 ohms
- Rated Impedance: 1000 ohms
- Suggested Load Impedance: > 250 ohms
- Frequency Range: 20 Hz to 20 kHz
- Sensitivity @ 1000 Hz: 19 mV/PA
- S/N Ratio CCIR: 468-3 Weighted 76 dB
- S/N Ratio DIN/IEC: 651 A-weighted 87 dB-A
- Equivalent Noise Level: 7 dB-A
- Maximum SPL (<0.5% @ 1000 Hz): 134 dB
- Preamplifier’s Dynamic Range: 127 db
- Electronics Type: SS
- Powering +48V Phantom or PSU: PH
- Polarity pin: 2 in phase
- Output Transformer: N
- Output Connector: XLR-3M
- Dimensions (inch/mm): 8.66 x 1.73"/133 x 64 mm
- Weight (lbs/grams): 8.8 oz/250 g
- Included Accessories: Microphone comes in a solid wooden box, with a GSM shockmount and a manual