The Marshall MXL Pro Pac Plus was developed with the professional and working musician in mind. It is perfect for recording music and vocals into digital or analog recording devices. The combination of two highly respected studio condenser microphones one for vocals, one for instruments, is perfect for working in recording studio and home music recording applications.

The MXL 2003 is intended for the most critical recording applications, such as acoustic guitar, where tremendous clarity, presence, and detail is required. A three position switch provides Bass cut and a -10dB pad for additional recording options. A transformerless FET preamp offers the engineer a smooth, even response. Its 3-micron gold-sputtered diaphragm reveals incredible transparency and warmth, until now, found only in the world?s most expensive mics. The MXL 2003 comes complete with a high isolation shock mount (MXL 56) that allows precision recording without the interference of outside vibrations.

The MXL 603S shares the characteristics of European and Japanese imports at a fraction of their price. Its transformerless design provides a solid bottom and an extremely open top end sound. The 603S is internally wired with World-renowned Mogami Cable for sonic integrity. The 603S is very well suited for most instrument miking and is very rugged for use on the road.

MPN: MXLRECORDINGPACPLUS

MXL 2003
- 27mm (1 in.) Large Capsule Condenser
- Gold-sputtered, 3 micron, low distortion diaphragm
- FET preamp with balanced transformer output
- Type: Condenser pressure gradient mic with large 27mm diaphragm capsule
- Frequency Range: 20Hz-23kHz
- Polar Pattern: Cardioid
- Sensitivity: 16mV/Pa
- Impedance: 150W
- S/N Ratio: 76dB (Ref. 1Pa A-weighted)
- Equivalent Noise Level: 18dB(A weighted IEC 268-4)
- Max SPL for 0.5% THD: 130dB
- Power Requirements: Phantom Power 48V -/+5V
- Current Consumption: <2.5mA
- Size: 55mm x 195mm
- Weight: 1.3lb
- Metal Finish: Black

MXL603S
- 20mm gold-sputtered, 6 micron gold diaphragm
- Satin silver finish with etched engravings
- Type: Condenser pressure gradient mic with large 20mm diaphragm capsule
- Frequency Range: 20Hz-25kHz
- Polar Pattern: Subcardioid (Wide Cardioid)
- Impedance: 200W
- Equivalent Noise Level: 17dB(A weighted IEC 268-4)
- Max SPL for 0.5% THD: 137dB
- Power Requirements: Phantom Power 48V +/-4V
- Current Consumption: <3.0mA
- Size: 22mm x 134mm
- Weight: 128g
- Metal Finish: Silver