Lexicon's IONIX U22 USB 2.0 Interface is the perfect addition to your desktop recording area due to it's excellent design. Setup this interface where it makes the most sense, between your keyboard and monitor. Control all your monitor input and output levels from this desktop interface that's right where you need it, at your fingertips.

IONIX U22 USB 2.0 Audio Interface from Lexicon features dbx microphone preamps on every channel and is more than equipped to offer a sound quality you only get with professional recording setups. Record two channels simultaneously thru the two analog combi-jack mic/line inputs and listen back thru its TRS balanced line outputs. The IONIX has a built-in Hi-Z instrument input, high-power headphone output and MIDI I/O providing you with various options for recording and playback.

The included Pantheon II VST/AU reverb plug-in features 6 reverb types with 16 adjustable parameters, and 35 factory presets that range from Vocal to Live Sound and Special Effects. It's easy to complete your mix and make your music sound its best with the exquisitely rich, full reverbs that made Lexicon famous. No compromise performance - ergonomic brilliance.

UPC: 691991500312

- USB 2.0 connection to DAW (up to 480 Mbps)
- 44.1 to 96 kHz sample rates (24 bit)
- Analog XLR-1/4 inch combi-jack inputs
- Analog 1/4 TRS (Stereo Main) outputs
- DBX high voltage, ultra-low noise mic preamps on all analog mic/line inputs
- 48V Phantom power for each input pair
- Input signal metering via 8 LED's per channel
- Signal mixing and stereo bus signal metering
- 1/4 inch high output headphone connections
- MIDI in/out
- Zero latency monitoring
- Low latency ASIO drivers
- Lexicon Pantheon II VST/AU reverb plug-in
- Supports Windows and Mac platforms
- Software suite includes Steinberg's Cubase LE4 and Toontrack EZdrummer lite

General
- Combi-jack Analog Inputs: 2
- Simultaneous Recording Sources: 2
- Microphone Preamps: 2
- Hi-Z Instrument Inputs: 1
- S/PDIF: No
- MIDI: Yes
- Headphone Connections: 1
- 1/4 inch Outputs: 2 (TRS Analog)

Microphone Inputs: Female XLR (Pin 2 Hot)
- Input Impedance: 3k ohm (balanced)
- Phantom Power: +48 Volts
- Maximum gain: +55 dB

E.I.N. (at max gain):
- -127 dB @ 55dB gain typical (150O source)
- -130 dB @ 55dB gain typical A-weighted (150O source)

- Maximum Input Level: +8 dBu
- Frequency Response: +/-1.5 dB, 20Hz - 20kHz
- THD+N: <0.02%, 20Hz - 20kHz, <0.002%, 1kHz, -6 dBu

Line Inputs: 1/4 inch TRS (balanced or unbalanced)
- Input Impedance: 20k ohm balanced (13k O unbalanced)
- Maximum Input Level: +18 dBu
- Frequency Response: +/-1.5 dB, 20Hz - 20kHz
- THD+N: <0.02%, 20Hz - 20kHz, <0.002%, 1kHz, +18 dBu

Instrument Input: 1/4 inch (TS unbalanced)
- Input Impedance: 1M ohm
- Maximum Input Level: +10 dBu
- Frequency Response: +/-2.5 dB, 20Hz - 20kHz
- THD+N: <0.08%, 1kHz, +4 dBu

Line Outputs: 1/4 inch TRS (balanced or unbalanced)
- Level: +18 dBu maximum
- Impedance: 32 ohm Balanced (16 ohm unbalanced)
- Headphone Output: 1/4 inch stereo jack 250mW per channel at 50O

Other
- MIDI Interface: 5 pin DIN connectors (MIDI in and MIDI out)
- Sample Rate: 44.1, 48, 88.2 or 96 kHz (determined by computer application)

Dynamic Range:
- A/D (24 Bit): 108 dB typical, A-weighted, 20Hz - 20kHz
- D/A (24 Bit): 110 dB typical, A-weighted, 20Hz - 20kHz
- A/D/A (24 Bit): 106 dB typical, A-weighted, 20Hz - 20kHz

- Power Requirements: 100/240 VAC, 50/60 Hz, 15 Watts