Skip to main content
Save 12% off your next order with Promo Code SAVE12 Activate Code

Crown XLS2000 DriveCore

650w Per Channel @ 4 Ohms Power Amplifier w/ Integrated Crossover & Limiter

Item # 45438

Retail Price
$899
Sale Price!
$379.00
Buy Today and Save $520.00 (58% from Retail)

We're sorry, this product is no longer available.

Manufacturer
Crown

Crown's XLS Series amplifiers define the standard for portable PA systems with unmatched performance, technology and affordability. Its advantageous flexibility includes multiple inputs so you can plug in anything and play anywhere, along with several system setup configurations. The integrated crossovers and switch-mode power supply produce superior sound, and Peakx™ limiters protect your speakers. Weighing less than 12 pounds, compared to 40 pounds for its competitors, it's much easier to set up and move from show to show. Simply put, the XLS is most reliable, versatile, efficient amp available today.

Peakx™ limiters provide the ultimate in performance and protection for your entire system. This advanced algorithm was specifically developed and tuned to work with this amplifier and power-supply to achieve higher SPL will less audible artifacts. This means less distortion, less shutdowns, and maximum safe power delivered to your speakers. The Peakx™ limiters can be easily turned on or off by channel right from the front panel eliminating the need to be digging around in the back of the dark rack.



0   0

MPN: XLS2000
UPC: 871015003825

  • Stereo, 2 ohms (per ch.): 1050W
  • Stereo, 4 ohms (per ch.): 650W
  • Stereo, 8 ohms (per ch.): 375W
  • Bridge-Mono, 8 ohms: 1300W
  • Bridge-Mono, 4 ohms: 2100W

  • XLS High Performance, Lightweight Class D amp weighs less than 11 lbs.
  • Integrated PureBand™ Crossover System for better performance and control
  • Peakx™ Limiters provide maximum output while protecting your speakers
  • XLR, 1/4", RCA inputs provide outstanding flexibility
  • Efficient forced-air fans prevent excessive thermal buildup
  • Electronically balanced XLR inputs; touchproof binding post and Speakon® outputs
  • Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel
  • Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications

  • Sensitivity (for full rated power at 4 ohms): 1.4 Vrms
  • Frequency Response (at 1 watt, 20 Hz - 20 kHz): +0 dB, –1 dB
  • Signal-to-Noise Ratio, Rated as dBr to full rated 8Ω power output (A-Weighted): > 103 dB
  • Damping Factor (8 ohm): 10 Hz to 400 Hz: > 200
  • Crosstalk (below rated 8Ω power): At 1kHz: > 85dB, At 20kHz: >55dB
  • Input Impedance (nominal): 20 k ohms balanced, 10 k ohms unbalanced
  • Load Impedance: 2 to 8 ohms per channel in Stereo, 4 to 8 ohms in Bridge Mono
  • AC Line Voltage and Frequency Configurations Available (± 10%): 120 VAC 60 Hz, 100 VAC 50/60 Hz, 220 and 240 VAC 50 Hz
  • Ventilation: Flow-through ventilation from front to back
  • Cooling: Internal heat sinks with forced-air cooling for rapid, uniform heat dissipation
  • Air Volume Requirements (per minute per unit): 80.15 ft³ (2.27 m³)

    Integrated Processing
  • PureBand™ Crossover System
  • Crossover Filter: Linkwitz-Riley 24dB per Octave
  • Crossover Frequency Range: 50 HZ - 3 kHz
  • Crossover Mode: Crossover (CH1=LPF, CH2=HPF), LowPass (both channels LPF), HighPass (both channels HPF), Bridge (LPF or HPF)
  • Peakx™ limiters: Channel independent clip limiter designed to provide maximum output while protecting your loudspeakers

    Input/Output
  • Input Connectors: XLR (one per channel), 1/4-Inch (one per channel), and RCA (one per channel). 1/4-Inch connectors can be used as loop-thrus to distribute signal to additional amplifiers.
  • Output Connectors: Two 4-Pole Speakon® Output Connectors accept 2-pole or 4-pole Speakon® connectors. The top Speakon connector is wired for both channels so it can be used for bridgemono wiring or for stereo wiring of two speakers to a single Speakon connector.
  • One pair of back-panel binding posts per channel; accepts banana plugs or bare wire. (European models do not accept banana plugs.)

  • Construction: 10.35-Inch (26.29cm) depth
  • Dimensions: EIA Standard 19-inch (48.3-cm) rack mount width, (EIA RS-310-B), 3.5-inch (8.9-cm) height, 10.7-inch (27.2-cm) depth
  • Net Weight: 10.75 lb (4.9kg)


Related Gear