Do you hear hum or buzz in your audio signal? Are long unbalanced lines across stage creating problems? Get the Hum Eliminator!

Almost all AC hum (60 Hz in the US) is caused by ground loops. These ground loops act like radio antennae picking up hum and noise. The Hum Eliminator completely eliminates this by breaking ground loops, making it impossible for the
signal lines to pick up the AC hum and noise.

Just plug the Hum Eliminator into the signal lines between offending pieces of equipment and you're done. Quick and easy!

MPN: 00242744
UPC: 614859056615

-Eliminates AC hum/60Hz buzz and noise, quick and easy
-Breaks ground loops safely, while leaving all signal grounds intact

-Automatically translates signal voltages to match differences in ground potentials, avoiding clipping

-Converts automatically back and forth between balanced and unbalanced lines at either end

-1/4" TRS "smart" jacks (tip, ring, sleeve) inputs and outputs. XLR adapters available

-Completely passive design with audiophile quality components assures the best possible noise and distortion performance

-Frequency response 20Hz to 70kHz plus or minus 0.5dB

-Distortion less than 0.005% THD @ 1kHz

-Crosstalk better than -97dB

-Maximum source impedance 1k0hm. Minimum load impedance 10k0hm

2 year warranty. EBTECH quality and reliability.
Made in the USA