The Voodoo-Blues is housed in the new style enclosure with both dual direct drive buffered outputs or hard wire output and has provision for an internal 9-Volt Battery (battery life 150Hrs) or can be powered from a 9-Volt DC Power Adapter (not supplied). Extensive internal filtering ensures that noise free operation is maintained even with the most basic of adapters. The dual direct drive outputs that are capable of driving very long leads without any loss and in fact you can use a speaker lead for the outputs if you want without any hum. This direct drive true bypass feature is standard on all our voodoo series and in effect reduces the output lead length to zero. This results in greater detail and fidelity than using two long lengths of guitar leads in traditional hard wire bypass set-ups. The problem of cable noise induced by vibration on stage is eliminated together with electrical magnetic interference induced into shielded cables from lighting rigs etc. Possibly of more importance there is no tone sucking at all from the output length of guitar cable. After all the ultimate guitar cable would have a lead length of zero, and guitar players can detect the difference between long and short cables easily. The overall signal quality in the unit is thus guaranteed right up to amplifier and this overall performance exceeds any other method in use today. When using a Voodoo Boost as the last device in a signal chain the distance to the amp does not come into consideration and long leads can be used successfully in recording situations e.g.: playing in the control room.
MPN voodooblues 0 0
The Voodoo-Blues has a true hard wire output plus two buffered outputs that can drive long cable lengths with no high frequency loss. These buffered outputs are disconnected when the hard wire output is being used. This means that all performance situations are catered for whether you want a true hard wire output or your situation calls for the advantages of buffered outputs.
No more screws to loose!. Slide the front panel back and there is the battery. It could not be simpler or faster.
50Hrs or more using a premium grade alkaline 9 Volt type.
Connection protocol: It uses the standard negative centre pin connection protocol used by many leading manufacturers.
Specifications: 9 volt DC. Regulated output is recommended.
Current rating: 50mA or more.
The position of the jack sockets and DC power jack are all on the same side of the enclosure and face away from you thus enabling the effect to be optimally positioned in pedal board set-ups.
Description$399.95 Add to cart
Wireless MIDI Guitar Controller
Description$299.99 Add to cart
Overdrive Boost Guitar Effects Pedal
Description$229.00 Add to cart
Vintage Fuzz Guitar Effects Pedal
Description$169.00 Add to cart
Pedal Case for up to 6 Boss Pedals (audio & power cables incl.)
Description$119.99 Add to cart
Classic Guitar Effects Pedal
Description$71.80 Add to cart
Twin Dynamic Envelope Filter Pedal
Description$25.00 Add to cart
Gift Certificate (may be purchased in multiple amounts)
Description$14.99 Add to cart
Tubular Single Guitar Stand