C1 V2 Mic
The Studio Projects C1 is a large diaphragm, fixed-cardioid condenser microphone employing a 1.06" (27mm) capsule, high quality, low noise amplifier and balanced, transformerless output circuitry. It features switchable -10dB or -20dB pad and 6dB@75Hz or 150Hz high pass filter for added control in various recording applications and a clear, full response expected from a large capsule microphone design.

Versatility is key in the recording arena, and the Studio Projects C1 is a well-proven and award winning tool. It is designed to deliver the finest quality vocal and instrumental recordings and will serve to enhance any professional or project studio at an unbelievably low price.

SPC-203x Litz Cable
The Studio Projects Microphone Cable featuers Litz construction and that means that each conductor strand is individually insulated. In most cables this is not the case, and without insulation the signal can randomly jump conductors in an uncontrolled manner. Distortion results in the phase and time domains, and although this may be difficult to measure, it can definitely be detected by the most sensitive of instruments, the human ear.

JamStand JS-MCTB200
JamStands By Ultimate Support offers great bang for your buck! JamStands is the newest line of dependable stands offered at a value price from the world's leading innovator of music accessories. From a wide range of mic stands of varying configurations, to guitar stools, benches and stands for keyboards, guitar and bass, to basic music stands and rolling racks, JamStands offers a wide range from which to choose—all from the brand you've known and trusted over the past 30 years!

MPN: C1V2

- Type: Pressure gradient solid state condenser microphone
- Polar pattern: Cardioid.
- Frequency response: 30~20000Hz.
- Sensitivity: 14mV/Pa=-37dB(0dB=1V/Pa).
- Output impedance: <200 Ohm.
- Load impedance: >1000 Ohm.
- Maximum SPL: 131 dB SPL for 1% THD @1000Hz (0dB SPL=0.00002Pa).
- Noise: (Line): 27dB (A weighted)---17dB.
- S/N: 77dB.
- Power requirement: 48 +/- 4V.
- Current consumption: <2.5mA.
- Circuit: JFET impedance converter, discrete balanced output.
- Connector: Gold-plated 3-pin XLR
- Size: dia: 2.1" length: 8.9"
- Weight: 26.9oz
- Pad: -10dB, -20dB
- Low cut : 6dB/Octave at 75Hz or 150 Hz.

Bundle Includes: