The Basslite CH2010 10" Bass Speaker delivers the tone you want. Recommended for bass guitar. Ideal in vented 1x10", 2x10", and 4 x10" enclosures.

MPN: Basslite CH2010
UPC: 876358000401

• Lighter weight
  
• Neodymium magnet
  
• Ideal in vented 1x10", 2x10", and 4 x10" enclosures
  
• Specification
  
• Nominal Basket Diameter: 10", 254mm
  
• Nominal Impedance*: 8 ohms
  
• Power Rating**: 150W
  
• Resonance: 58Hz
  
• Usable Frequency Range: 54Hz-3kHz
  
• Sensitivity***: 96.7
  
• Magnet Weight: 4 oz.
  
• Gap Height: 0.28", 7.2mm
  
• Voice Coil Diameter: 2", 50.8mm
  
• Thiele & Small Parameters
  
• Resonant Frequency (fs): 58Hz
  
• DC Resistance (Re): 5.37
  
• Coil Inductance (Le): 0.52mH
  
• Mechanical Q (Qms): 6.5
  
• Electromagnetic Q (Qes): 0.47
  
• Total Q (Qts): 0.44
  
• Compliance Equivalent Volume (Vas): 43 liters / 1.5 cu. ft.
  
• Peak Diaphragm Displacement Volume (Vd): 120cc
  
• Mechanical Compliance of Suspension (Cms): 0.26mm/N
  
• BL Product (BL): 11.1 T-M
  
• Diaphragm Mass inc. Airload (Mms): 30 grams
  
• Efficiency Bandwidth Product (EBP): 123
  
• Maximum Linear Excursion (Xmax): 3.5mm
  
• Surface Area of Cone (Sd): 344.9 cm2
  
• Maximum Mechanical Limit (Xlim) : 7.5mm
  
• Recommended Enclosure Volume
  
• Vented: 17-51 liters/ 0.6-1.8 cu.ft.
  
• Overall Diameter: 10.25", 260.4mm
  
• Baffle Hole Diameter: 9.13", 231.9mm
  
• Front Sealing Gasket: fitted as standard
  
• Rear Sealing Gasket: fitted as standard
  
• Mounting Holes Diameter: 0.28", 7.0mm
  
• Mounting Holes B.C.D.: 9.73", 247.1mm
  
• Depth: 4.75", 121mm
  
• Net Weight: 3.6 lbs., 1.6 kg
  
• Shipping Weight: 4.7 lbs., 2.1 kg
  
• Materials of Construction
  
• Copper voice coil
  
• Polyimide former
  
• Neodymium magnet
  
• Non-vented core
  
• Die-cast aluminum basket
  
• Hemp Cone
  
• Cloth cone edge
  
• Zurette dust cap
  
• *Please inquire about alternative impedances.
  
• **Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, non-temperature controlled environment.
  
• ***The average output across the usable frequency range when applying 1W/1M into the nominal impedance. Ie: 2.83V/8ohms, 4V/16ohms.
  
• Eminence response curves are measured under the following conditions: All speakers are tested at 1w/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software
  calibrated) mounted 1m from wall/baffle | 2ft. X 2ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction | Hafler P1500 Trans-Nova amplifier | 2700 cu.ft. chamber with
  fiberglass on all six surfaces (three with custom-made wedges)