The Rupert Neve Designs Portico 5017, comprised of a rugged, portable chassis with world class Portico pre-amp, compressor and DI circuits as well as two channel operation, variphase, silk and DI/mic blending capabilities, is an innovative and powerful tool for recording or live performance. In replacing the Portico 5016 Mic Pre / Variphase DI, the 5017 Mobile DPC adds single knob compression, DI / Mic Pre blending, and a go anywhere design to a well established classic.
With Portico Series custom transformers and silk mode, the Mobile DPC's sonic signature is nothing short of legendary. It's the 5017's revolutionary feature set however that make it an indispensable tool for studio recording, live recording and stage performances.
Rupert Neve Portico 5017 Mobile DI, Microphone Preamp and Compressor Features
Dual Channel Use
Used as a two channel device, a lead singer and guitar player, can take the classic studio quality of the 5017 wherever they go; using the DPC for a Vocal mic pre and compressor, as well as a separate DI preamplifier. To achieve this, the blend control should be selected as fully DI (blend off), and an internal jumper can be selected to apply the compressor to the mic pre signal. When engaged, Silk mode would effect both vocal and guitar tracks, and the HPF control would effect only the mic path.
Used as a single channel device for instruments, the 5017 can be used to phase align, combine and compress direct and amplified signals. To achieve this, use the DI for the instrument's direct signal and the mic preamp for the speaker cabinet signal. The blend control is used for mixing direct and amplified signals to achieve the desired tonal blend between the two sources, and the variphase is used to minimize or extenuate phase cancellations between the two signals. To compress the blended signal, the internal compressor jumper must be set to the blend path (this is the default setting). This technique could also be used to create a single, mixed output of a guitar and vocals.
Based around a new LDR (light dependent resister) design, the 5017's opto-coupler compressor has been simplified to a single threshold control with auto make up gain. By default, the compressor is set to a fixed 2:1 ratio with an internal jumper to change between standard and fast time constants. To set the compressor, simply dial the threshold control down until the desired amount of compression is achieved. An LED light indicates when the compressor is active.
In addition to the standard polarity reverse, the 5017 also incorporates a vari-phase control to adjust the phase incrementally. This control is useful any time two signals derived from the same source are combined.
For instance, even with careful placement, the combination of close miced drums and overheads, can often yield hollow sounding results. By using the variable phase adjust, the direct signal can be phase rotated until the signals are naturally aligned.
This technique is also extremely useful when combined with the internal blend control on instruments. A bassist, using both direct and miced signals can blend the two into a single output, using the vari-phase to reach an optimal alignment. By adjusting the phase in the 5017, the musician or engineer can find the abso
- With two transformer coupled outputs, the 5017 has separate line outputs for the DI/Blend and Mic signals when the blend control is set to fully DI. The mic output is always independent.
- Much could be written about this feature, suffice to say, that it gives a subtle option to enhance sound quality in the direction of vintage modules. The silk button reduces negative feedback and adjusts the frequency spectrum to provide a very sweet and musical performance. We suggest you try it and make your own judgment.
- Mic gain is from 0dB to 66dB. Overall gain to restore the apparent program level
- DI Gain: DI Gain is from 0dB to 30dB
- DI input: Balanced or unbalanced Hi-Z input for instruments
- High pass filter: The high pass filter is a valuable aid in any signal chain but particularly so in a microphone preamplifier. Signals below 80hz can be attenuated at a rate of 12db / octave, getting rid of building rumble, air handling motor hum etc.
- Phantom power: Provides 48v phantom power to microphones. Controlled by a switch on the back of the unit.
- Phase invert: Reverses the polarity of the mic input
- When signals exceed the "threshold" level, the gain is reduced at a controlled 2:1 ratio, with attack and release time constants set to standard or fast depending on the internal jumper setting.
- Indicators on the 5017 denote signal presence and clipping on both DI and mic signals, as well as compressor activation.
- Two internal jumpers in the 5017 can be set to change the compressor from the mic channel to the di / blend channel, and to change the compressor time constant from standard to fast.
*Excellent NEW condition / complete. No original Box. Full manufacturer warranty applies. These items qualify for 8thstreet Return & Trade-back policies.
Description$1,899.00 Add to cart
Active Ribbon Microphone
Description$1,795.00 Add to cart
2-Channel Compressor / Limiter (horizontal)
Description$1,725.00 Add to cart
Five Band EQ (horizontal)
Description$1,074.99 Add to cart
Refernce Multipattern Condenser Microphone
Description$249.00 Add to cart
Advanced composite wall microphone screen
Description$149.00 Add to cart
Dynamic Semi-open Pro Headphones
Description$54.95 Add to cart
Studio Microphone Cable
Description$25.00 Add to cart
Gift Certificate (may be purchased in multiple amounts)