Play Music Reliably and Easily with This Professional Rackmount CD and Bluetooth® Player. This Professional Player Supports aptX® Coding for High Audio Quality.

Wireless Playback of a Variety of Audio File Formats from Devices that Support Bluetooth®
Through the antenna located in the front of the CD-200BT, audio file playback signals can be received from a variety of Bluetooth® compatible devices. The types of files that can be played back depend on the transmitting device; so any file type that can be played back by iTunes, Windows Media Player, smartphone player apps and other music applications can be played through this unit.
Bluetooth® playback uses a wireless connection, so no new wiring is necessary to use compatible audio sources as long as they are in signal-range, allowing easy and speedy playback.
Note: The transmitting device must support Bluetooth® transmission.

Device Selection Function Allows Transmission Devices to Be Registered in Advance for Quick Switching and Operation
Bluetooth® playback requires pairing. Normally, pairing is one to one, but the CD-200BT has a device selection function that can be used to pair with multiple transmitting devices. By registering devices to be used in advance, you can switch smoothly between transmission devices for playback with minimal connection interruption time. （Only one device can be used for playback at a time）
In addition, since the name of the transmission device currently being used for audio playback can be shown on the display, you can check the connection status within this unit.

Wireless Playback with High Quality Audio
A variety of different profiles are used for Bluetooth® transmission depending on the application. The CD-200BT supports the A2DP (Advanced Audio Distribution Profile) for high audio quality music playback, and SBC (Sub Band Codec), a standard A2DP codec. In addition, it supports the aptX® codec, making high quality wireless audio playback possible. The aptX® codec also has an error recovery function, so audio is much less likely to be interrupted, compared to ordinary SBC transmission.

MPN: CD200BT

• Playback media: CD,CD-R,CD-RW (8/12cm)
  
• Playback format: CD-DA, Stereo, 44.1kHz, 16bit, WAV(Data CD), Stereo, 8/16/32/11.025/22.05/44.1/12/24/48kHz, 16bit, MP2(Data CD), Stereo, 32/44.1/48kHz、32-384kbps, MP3(Data CD), Stereo, 32/44.1/48kHz 32-320kbps, VBR
  
• Analog audio input: /AUX
  
• Connector: 1/8"(3.5mm) Stereo Mini Jack
  
• Input impedance: 22k ohms
  
• Nominal input level: -20dBV
  
• Maximum input level: -4dBV
  
• Analog audio output: UNBALANCED
  
• Connector: RCA pin-jack
  
• Output impedance: 200 ohms
  
• Nominal output level: -10dBV(0.32Vms)
  
• Maximum output level: +6dBV(2.0Vms)
  
• Digital audio output: COAXIAL
  
• Connector: RCA pin-jack
  
• Format: IEC60958-3(S/PDIF) OPTICAL
  
• Connector: TOS(JEITA RC-5720C)
  
• Format: IEC60958-3(S/PDIF)
  
• Bluetooth®
  
• Version: 3.0
  
• Output Class: Class 2
  
• Supported profile: A2DP、AVRCP
  
• Supported A2DP codec: SBC、AAC、aptX®
  
• Supported contents protection: SCMS-T
  
• PHONES
  
• Connector: 6.3mm(1/4") stereo phone jack
  
• Maximum output level: 20mW + 20mW (THD 0.1%, 32ohms loaded)
  
• Power: AC120V, 60Hz (North American)/AC230V, 50Hz (EUR)/AC240V, 50Hz (Australia)
  
• Power consumption: 11W
  
• Dimensions: 481(W)×94.5(H)×298(D)mm
  
• Weight: 4.5kg
  
• Operating temperature: 5-35˚C
  
• Inclination of installation: 5˚ or less
  
• Standard accessories: Wireless remote controller(RC-CD200BT), AA battery, Rack mounting screw kit, Warranty card, Owner's manual
  
• Frequency response: 20Hz-20kHz, +/-1dB(playback, JEITA)
  
• Distortion: 0.01% or less(playback, JEITA)
  
• S/N ratio: 90dB or greater(playback, JEITA)
  
• Dynamic range: 90dB or greater(playback, JEITA)
  
• Channel separation: 90dB or greater(playback, JEITA)