Power Sequencer
Item # 74683
Retail Price
$399
Sale Price!
$349.00
Buy Today and Save $50.00 (13% from Retail)
We're sorry, this product is no longer available.
Merit M-8S Power Sequencer is the perfect low-cost AC power solution for any rack mount system. Install an M-8S in your rack, and the eight outlets in the rear panel will power up in sequence and protect all your equipment up to a 15-amp load.
0 0
MPN: M8S
UPC: 700315928944
- Standard level AC protection and filtering.
- Six sequenced rear panel outlets (in 3 groups), two unswitched rear panel outlets, and one front panel unswitched outlet.
- Momentary and Maintained sequencing via rear panel terminal block or front panel switch (momentary only).
- All settings and configurations available on rear panel.
- 15 amp rating.
- Three year limited warranty.
- Maximum Output Current: 15 amps, 120 VAC (Thermal breaker)
- Line Cord: 14AWGx3, 10 feet, black, fixed, NEMA 5-15P plug
- AC Receptacles: Convenience Outlet (Front Panel) 1 Un-switched NEMA 15-5R
- Rear Panel Outlets: 2 Un-switched NEMA 5-15R (1 duplex),
- 6 Sequenced NEMA 5-15R (3 duplexes, each controlled by separate relay)
- Standard level AC Surge Protection : Merit Class (sacrificial)
- Spike Protection Mode : Line to neutral, zero ground leakage
- Max Continuous Operating Voltage : 130V RMS
- Max Clamp Voltage : 500 Volts Peak
- Peak Impulse Current : 12,000 Amps
- Energy Rating (2 X 820μS) : 225 Joules
- AC Filtering : Standard level Pi LCR Filter
- Noise Attenuation : >26dB, 100 Khz to 1 MHz
- Operating Temperature Range : 5C (40F) to 40C (105F) degrees
- Humidity Range : <90% rH (Relative Humidity)
- Rocker Switch : Front panel, Sequence (ON, OFF)
- Thermal Circuit Breaker : Front panel, push to reset
- Front Panel Indicators : Delay 1, Delay 2, Delay 3, Power,
- Protection OK
- Rear Panel DIP Switches : 12V Mode On/Off, GND Mode On, Momentary/Maintained
- Potentiometer : Rear panel, time calibration fine tune delay adjust
- Remote Terminal : +5-30VDC In, 12VDC (12mA) Out
- Remote Terminal : Phoenix type 4-Pin Connector with
- Screw terminals; +12V, STAT, REM, GND (Class 2 Wiring)
- Dimensions : 19"L x 8.75"D x 1.75"H â€" ANSI 1RU
- Weight : 7 lbs.
- Power Consumption : 5 Watts
- Safety Agency : C/CSA/US
Related Gear
-
Peavey Aureus
Item # 81121
Description
$1,799.99 View Details
28-Channel Digital Mixer with Touchscreen -
MOTU M4
Item # 80674
Description
$269.95 View Details
4-in/4-out USB-C Audio Interface w/ 2 Microphone Preamps -
Furman M-8LX
Item # 43795
Description
$169.99 View Details
15 Amp 9 Outlets Power Conditioner with Pullout Lights -
Rapco HOGM-25.K Microphone Cable
Item # 68605
Description
$39.95 View Details
25 Ft Pro Roadhog Mic Cable XLRM-XLRF -
Rapco RM1-10
Item # 2139
Description
$18.95 View Details
10 foot Microphone Cable, XLRM to XLRF