The DM1 DYNAMITE is an active inline preamp intended to be inserted between a passive ribbon or dynamic microphone and a microphone preamplifier. Providing a robust +28dB of gain, the DM1 is the perfect way to boost the signal from a passive mic, reduce the likelihood of interference, and provide significantly improved level to your preamp – all without adding noise or coloration.

With a sophisticated class-A design and specially-selected high-grade FETs, the DM1 has the lowest self-noise in its class. Additionally, the gain it provides is always a consistent 28dB regardless of the connected load, thanks to its dedicated output buffer amplifier. Its output impendence is also the lowest in its class, allowing it to drive long cable runs while reducing susceptibility to RF interference, buzz and hum.

Reliable operation even in demanding on-stage applications in difficult environments is ensured by the roadworthy and slim all-metal design, robust construction, and high-quality manufacturing standards.

MPN: DM1
UPC: 819032011560

• +28dB OF CLEAN, CONSISTENT GAIN, INDEPENDENT OF LOAD designed for neutral, balanced sound quality
  
• the perfect way to boost the signal of a passive microphone
  
• gain stays consistent regardless of connected load
  
• provides significantly improved level to your mic preamp for proper gain staging
  
• SOPHISTICATED CLASS-A ELECTRONICS
  
• state of the art electronics and high-grade FETs provide
• supremely low noise
  
• transformerless design for pristine sound quality
  
• provides the lowest noise in its class
  
• DEDICATED OUTPUT BUFFER AMPLIFIER
  
• provides +28dB output independent of load impedance or cable length
  
• extremely low output impedance
  
• drives long cable runs and can reduce susceptibility to RF interference, buzz & hum
  
• SLIM, RUGGED ALL-METAL HOUSING WITH PREMIUM FINISH
  
• efficient rejection of any electrical interference and noise
  
• high-quality finish ensures a great look for many years
  
• slim design allows for easy placement in the studio or on stage
  
• GOLD-PLATED XLR CONNECTOR for loss-free and reliable signal connection
  
• Frequency Range: 10 Hz - 120,000 Hz (-0.3 dB)
  
• Gain: 28 dB (load 1kOhms)
  
• Max output level (0.5% THD): 8.3 dBV (2.6 V)
  
• Output noise level: 9 μV (JIS-A)
  
• Powering: 48 Volts according toIEC 61938
  
• Electrical impedance: 135 Ohms
  
• Recommended load impedance: >1k Ohms
  
• Current consumption: 3.0 mA
  
• Connectivity: 3-pin male/femaleXLR connector
  
• Dimensions: Diameter: 19 mm (0.75 in.) Length: 95.5 mm (3.76 in.)
  
• Weight: 80 g (2.82 oz.)
  
  In The Box
  
• DM1
  
• sE Logo Sticker
  
• User manual with warranty card