The X1 A: It could be your first mic, but it's one you'll want to keep forever.
There's a new entry point to sE's acclaimed X1 Series, and it's breaking the performance barrier (again) for every mic in its class.

With a newly-developed condenser capsule and an exterior based on the rugged metal chassis of the X1, the X1 A offers first-class sound & specifications at an even better "home studio" cost, featuring an extremely natural frequency response, massive SPL-handling capabilities (150dB!), switchable attenuation and low-cut filters, and a perfectly balanced sensitivity level - so it's at home on absolutely any source.

ALL-METAL HOUSING & PREMIUM FINISH
Unlike the cheaply constructed bodies of some other "entry-level" microphones, the X1 A's all-metal chassis provides efficient rejection of any electrical interference and noise - and the high-quality finish ensures a great look for years to come.

INTEGRATED WINDSCREEN
Eliminates the need for an external pop filter, and provides an extra layer of safety and security for the all-important capsule.

COMPLETELY NEW ACOUSTIC DESIGN
The X1 A's new condenser capsule design is a work of art, delivering stellar sonic performance on any source with incredible speed, accuracy, and well-balanced frequency response.

The electronics have also undergone a complete overhaul, and exhibit better specifications and sound - on and off the test bench - than any other microphone in its class.

ATTENUATION & LOW CUT SWITCHES
The -20 dB pad switch on the left provides extended dynamic range, enabling a wide range of applications and close-mic techniques for even the loudest instruments...think super-heavy electric guitars, fortissimo brass instruments, and heavy-footed kick drums.

On the right, the 100 Hz low-cut switch helps eliminate low-frequency rumble or footfall noise, and compensates for excessive bass with close-mic techniques (proximity effect).

GOLD-PLATED XLR CONNECTOR
Ensures loss-free, reliable signal connection for years and years and years and...

The X1 A comes complete with a rock-solid, newly designed swivel mic clip and thread adapter to fit with any mic stand.

MPN: X1 A RF-X BUNDLE
UPC: 819032011171

X1A

• Capsule Type: 2/3" Permanently-Biased Condenser
  
• Directional Pattern: Cardioid
  
• Frequency range: 20 Hz - 20 kHz
  
• Impedance: <50 Ohms
  
• Sensitivity: 20 mV/Pa (-34 dB)
  
• Max SPL: 130 / 150 dB (0 / 20 dB pad, (0.5% THD @ 1kHz)
  
• Signal to Noise Ratio: 78 dB(A)
  
• Equivalent Noise Level: 16 dB(A)
  
• Dynamic Range: 114 / 134 dB (0 / 20 dB pad)
  
• Low Cut Filter: 100 Hz, 6 dB/oct, switchable
  
• Attenuation Pad: 20 dB, switchable
  
• Connectivity: 3-pin male XLR
  
• Power requirement: 48V phantom according to IEC 61938
  
• Recommended Load Impedance: >1K Ohms
  
• Current Consumption: 4.0 mA
  
• Diameter: 58 mm (2.28 in.) x Length: 169 mm (6.65 in.)
  
• Weight: 390 g / 13.8 oz
  
  IN THE BOX
  
• X1 A microphone
  
• swivel mic clip
  
• mic stand thread adapter