Maximum intelligibility and clean, accurate reproduction for vocalists, lecturers, stage and television talent, and houses of worship
Low-profile design (a mere 5 mm in diameter) is ideal for applications requiring minimum visibility
Operates on battery or phantom power
All wireless models available in either low-reflectance black or beige
Extensive array of provided accessories includes a clothing clip, viper clip, magnet clip and lanyard (black models only), windscreens, element covers, interchangeable single and double mic holders
Accessories available separately include complete accessory kits, clothing clips, three-pack element covers and three-pack windscreens

MPN: AT899
UPC: 042005128976

AT899 Specifications
Element Phantom Power Requirements
Condenser
11-52V, 2 mA typical

Polar Pattern Battery Type
Omnidirectional
1.5V AA/UM3

Frequency Response Battery Current/Life
20 - 20,000 Hz
0.4 mA/1200 hours typical

Open Circuit Sensitivity Switch
PHANTOM: -43 dB (7.0 mV) re 1V at 1 Pa
BATTERY: -46 dB (5.0 mV) re 1V at 1 Pa
Roll-off

Impedance Low Frequency Roll-off
PHANTOM: 200 ohms
BATTERY: 250 ohms
80 Hz, 12 dB per octave

Maximum Input Sound Level Weight
PHANTOM: 138 dB SPL, 1 kHz at 1% T.H.D.
BATTERY: 116 dB SPL, 1 kHz at 1% T.H.D.
0.02 oz (0.5 g)

Signal to Noise Ratio Power Module
64 dB, 1 kHz at 1 Pa
In-line

Dynamic Range (Typical) Output Connector
PHANTOM: 108 dB, 1 kHz at Max. SPL
BATTERY: 86 dB, 1 kHz at Max. SPL
XLRM-type (power module)


Accessories Furnished: AT8537 power module; AT8439 cable clip; clothing clip base; viper clip base; magnet clip base with plate and lanyard; three single mic holders; two double mic holders; two element covers; two windscreens; battery; protective case