FlexMics™ have been chosen for use in premium church installations, houses of congress, court rooms, political debates, corporate boardrooms, universities and many other educational and governmental institutions.

MPN: FMR720

• Rigid center and flex at both ends
  
• Uniform frequency response on or off axis
  
• Flat from 50Hz to 20kHz within + 2dB at 6 inches
  
• Will handle up to 145dB SPL
  
• No handling noise
  
• High rejection of sounds to the rear of the microphone
  
• Rejects RFI
  
• They will handle high sound pressure levels with high rejection of sounds to the rear of the microphone
  
• Incredible gain before feedback
  
• Orators can speak above, below or to either side of the microphone and maintain the same pristine sound quality with high intelligibility
  
  
• Frequency Response: 50Hz to 20kHz ±2dB at 6 inches (15cm)
  
• Polar Pattern: Cardioid or Hypercardioid
  
• Sensitivity: 10mV/Pa (-40dBV/Pa)
  
• Power Requirements: 48V Phantom, 10mA
  
• Max Acoustic Input: 145dB SPL
  
• Output: XLR (pin 2+)
  
• Output Impedance: 100Ω, balanced (50Ω ea. pin 2 & 3)
  
• Min Output Load: 600Ω between pins 2 & 3
  
• Noise: 22dB SPL equivalent (A weighted)
  
• Gooseneck: Rigid center with nominal 2.5″ to 3″ flex on both ends
  
• Dimensions L x D: 720mm x 22mm (27 x .860 inches)
  
• Weight: .3 lb. (137g)