Sky System One is the first in a line of 2.1 - integrated 3-way monitoring systems to be offered by Blue Sky International. Sky System One consists of two Blue Sky SAT 6.5 bi-amplified satellite speakers and a single 200-Watt powered Sub 12 subwoofer. Employing Blue Sky’s proprietary computer-optimized crossover and bass-management networks, the Sky System One delivers seamless full range audio from the subwoofer to the main monitors with smooth on and off-axis frequency response. In addition, the Sky System One is THX pm3 Approved for use in THX pm3 Certified Studios and by adding three SAT 6.5s and a Blue Sky BMC, the system is easily expandable for use in a 5.1 monitoring setup.

UPC: 000888885256

Specifications - Sat 6.5 Monitor
- Input Impedance 40k Ohms balanced
- Common Mode Rejection Ratio 40dB typical 60Hz
- Voltage Sensitivity 200mV = 90dB SPL @ 1M
- Maximum Input Level +24dBu balanced
- Frequency Response
- +/- 1.5dB 200 to 10kHz
- +/- 3.0dB 80 to 20kHz
- Low Frequency Cutoff 80Hz
- Low Frequency Rolloff 12dB per octave
- System Q 0.707
- System Crossover Frequency 1.5kHz
- System Crossover Slope 4th order Linkwitz-Riley Acoustic

Enclosure
- Solid 3/4" MDF construction with 1" front and rear baffle" =
- Viscoelastic energy absorbing front baffle coating
- 1/4"x 20 inserts for attachment of OmniMount type 60 brackets (formerly known as the 100 Series).
- Dimensions are 12" H x 8" W x 10 1/4" D (11.88" with heatsink and tweeter wave guide)
- Weight 27lbs.

6 1/2" Hemispherical Woofer
- Long excursion design with a cast aluminum frame
- 1 1/2" aluminum voice coil with vented motor for high power handling
- Copper shorting ring for lower distortion.
- Ultra-Low power compression
- Mica filled polypropylene cone and rubber surround
- Fully video shielded

1" Tweeter
- Dual concentric diaphragm with integral wave guide
- High power handling neodymium motor structure
- Fully video shielded
- Sub 1Khz primary resonance

Satellite Amplifier
- Discrete symmetrical bipolar design with localized feedback
- 100-Watts RMS into 4-Ohms for the woofer
- 100-Watts RMS into 4-Ohms for the tweeter
- THD + Noise less than 0.015% at rated output @1kHz
- XLR balanced input
- Adjustable gain control.
- Computer optimized crossover

Specifications - Sub 12
- All subwoofer measurements are measured using the subwoofer direct input, which
- does not have a low pass filter.
- Voltage Sensitivity 90dB SPL @ 100mv @ 1M
- (40 to 80Hz bandwidth limited)
- Frequency Response (anechoic) 30 to 200Hz +/-3dB
- Typical In-Room Response 20 to 200Hz (3000 Cubic Feet)

Bass Management Section
- Input Impedance 20k Ohms balanced
- Common Mode Rejection Ratio 40dB typical @60Hz
- Maximum Input Level (all inputs) +24dBu balanced
- Maximum Output Level +24dBu balanced
- Output Impedance 200 Ohms balanced
- Auto Mute Time Out >15 Minutes
- Mute Threshold (all inputs) 30mV

Left & Right Inputs to Sat Outputs
- Gain (balanced in and out) 0dB
- High-Pass Filter type 2nd order Linkwitz-Riley
- High-Pass Filter Cutoff 80Hz
- High-pass Filter Q 0.707
- THD + Noise 0.002% @ 1kHz @ +4dBu

Left & Right Inputs to Sub Out
- Gain 0dB
- Low-Pass Filter Type 4th order Linkwitz-Riley
- Low-Pass Cutoff 80Hz
- Subwoofer Direct In to Direct Output
- Gain 0dB
- Low-Pass Filter None

Enclosure
- Solid 3/4" MDF construction with 1" MDF Front and Rear Baffle
- Viscoelastic energy absorbing front baffle coating
- Flush mounted driver
- Isolation feet are included. Inserts for optional attachment of spike feet.
- Dimensions are 18" H x 16" W x 20" D (22.07" with heatsink and grill)
- Weight 62lbs

12" Woofer
- Long excursion design with cast aluminum frame.
- 2" voice coil with vented motor for high power handling
- Fully video shielded
- Subwoofer Amplifier
- Discrete symmetrical bipolar design with localized feedback
- 200-W RMS into 4 Ohms
- THD + Noise less than 0.015% at rated power @100Hz
- Adjustable gain control
- Measurement Data (Click to view response graph)