AMT’s microphone system designed for the Harp. The AMT P43 Microphone is attached to a two-part clip. The clip will fit into the sound holes in the back of almost any harp. Simply turn the thumbscrew to loosen the clip, slide it over the edge of a sound hole, and tighten the thumbscrew again. There is not any “correct” spot to attach the microphone to the harp. Each harp has its own place where the microphone will sound best. If you have multiple sound holes in the back of your harp, you may want to try the microphone in all of them. The microphone attaches as readily at the top of a sound hole as at the bottom. The gooseneck can be bent to point the microphone straight in or at an angle, and to position it either outside or inside the body of the harp. AMT encourages you to try several positions and get a feel for the different types of sound you will get with the mic in different places. In general, positioning the microphone higher up on the harp will emphasize the higher notes, while putting it lower emphasize bass notes.

MPN: P43

- Two-part clip will fit into the sound holes in the back of almost any harp
- Gooseneck can be bent to point the microphone in any angle