Allen & Heath PL2 Remote Control, is a remote control device available for use with the Allen & Heath DR-switch or iDR-switch logic expanders. It is a wall plate or furniture mounted module comprising plastic control panel and attached circuit assembly. It can be mounted in a single unit wall box using a standard face plate (UK. EU or US version supplied). A pre-cut brushed aluminium EU (AA5029) or US (AA5030) plate is supplied.

The PL-2 interfaces with the DR/iDR-switch rear panel SWITCH INPUTS and LOGIC outputs ports. The number of PL-2 units which may be connected is determined by the number of remote switch and logic output lines from the DR/iDR system and how many you wire to each PL unit. The wall plate switch and indicator functions are programmed using the Allen & Heath WinDR (DR-switch) or iDR System Manager (iDR-switch) software. Space is provided on the control panel for custom labelling.

The following combination of controls makes the PL-2 ideal as a wall mounted room remote controller in installed audio systems. The installer can program the unit so that the non-technical operator has local control using pre-programmed switches LEDs.

4 switches For DR-switch they can be assigned for level up or down control (input. output. or crosspoint). mute toggle or patch recall. For iDR-switch they can be assigned for level up or down control (input. output. crosspoint or group). mute toggle. polarity toggle. audio monitor select. or patch recall.

4 LED indicators For DR-switch they can be assigned to display input or output channel mute status. or as patch related static indicators. For iDR-switch they can be assigned as audio meters (choice of 8 points in the signal path). mute status. polarity status. or as patch related static display. Each can be wired to display either red or green. Two DR/iDR-switch outputs can be used to switch one LED to red. green or yellow. Custom labels Recessed areas are provided for fitting custom adhesive labels. Recommended maximum sizes are 6x26mm and 26x9mm (h x w).

MPN: PL-2

- Description: Single wallplate module
- Inputs: 4x switch
- Outputs: 4x tri-colour LED
- For use with: DR / iDR-switch
- Connection: 2x 7way screw terminals
- Cable: Multicore, resistance <1k ohm