The Neumann TLM 67 is a large-diaphragm condenser microphone in the classic Neumann style. The stylish pearl-gray of the microphone body combined with the classic Neumann nickel lends the TLM 67 microphone a touch of distinctive individuality.

The letters TLM stand for transformerless microphone. In the Neumann TLM 67 mic, an electronic circuit is used rather than a conventional output transformer. Like a transformer, the circuit ensures good common mode rejection, effectively suppressing interference signals that affect the balanced modulation line. The TLM 67 microphone can operate at sound pressure levels of up to 105 dB without distortion, and has a dynamic range of 94 dB (A-weighted), without the use of the pre-attenuation switch.

MPN: tlm 67

- Sound characteristics based on the legendary U 67
- Three switchable directional characteristics (omnidirectional, cardioid and figure-8)
- Switchable high-pass filter and pre-attenuation
- Transformerless circuit technology
- New dual-color exterior design
- Includes a wood storage box
- Acoustical operating principle: Pressure gradient transducer
- Directional pattern: Omni/cardioid/figure-8
- Frequency range: 20 Hz ... 20 kHz
- Sensitivity at 1 kHz into 1 kohm: 10/18/9 mV/Pa
- Rated impedance: 50 ohms
- Rated load impedance: 1 kohms
- Equivalent noise level, CCIR1): 29/24/30 dB
- Equivalent noise level, A-weighted1): 16/11/17 dB-A
- Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL): 65/70/64 dB
- Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL): 78/83/77 dB-A
- Maximum SPL (tube characteristic) for THD < 0.5 %2): 110/105/111 dB
- Maximum SPL (tube characteristic) for THD < 5 %2): 130/125/131 dB
- Maximum output voltage: -1 dBu
- Dyn. range of the mic. amplifier (A-weighted, 0.5 %2)): 94 dB
- Dyn. range of the mic. amplifier (A-weighted, 5 %2)): 104 dB
- Power supply: P48
- Matching connector: XLR 3F
- Weight: 1.08 Lb., (490 g)
- Diameter: 2.20", (56 mm)
- Length: 7.87", (200 mm)