The GHS Gorgomyte Fret and Fingerboard Cleaning and Conditioning Cloth works on both your frets and your fingerboard. Developed by world-renowned guitar tech Jimmy Johnson, the Gorgomyte cloth is used by professional guitar techs everywhere!

Here's how to maximize your use of Gorgomyte Cleaning Cloths: cut the polishing cloth into 2" squares. Use one square for the entire neck. Store the remaining squares in the resealable bag for future cleaning and conditioning.

The frets and fingerboard of your guitar get more hands-on use, and often abuse, than any other area of the instrument. The fine wood gets gummed up with finger oils and dirt. The frets collect these impurities too, making them dull and less than smooth.

Yet, this is the one area we seem to neglect when it's cleanup time. The reason is that it has always been a messy, delicate and time-consuming job. Getting the wood back to its original luster and the frets shining meant using potentially damaging and abrasive products like steel wool. Turn an hour-long task into just a few minutes and get results you never thought possible with Gorgomyte. You WILL be amazed.

MPN: A6
UPC: 737681430313

Instructions

• Remove the strings from your instrument.
  
• Cut the Gorgomyte Polishing Cloth into 2-inch squares. Use one square for the entire fretboard. Store remaining squares in the bag for future cleaning and conditioning.
  
• Start at the 1st fret, rub the Gorgomyte Polishing Cloth back and forth over the entire fretboard and frets. Work your way toward the bridge end of the neck, turning the cloth as you move up the neck.
  
• With a separate soft, clean, dry, 100% cotton cloth (an old clean cotton T-shirt or cotton face cloth works best), buff the conditioned fretboard and frets until the dirt is removed.
  
• Restring your guitar and freel how much smoother it plays and how bright the frets are.