The Eminence Basslite C2515 15" Speaker delivers the tone you want. It's recommended for bass guitar and is excellent in either sealed or vented enclosures.

Eminence recommends the Basslite C2515 as a replacement speaker for the Kustom Groove 215H speaker cabinet and the Behringer Ultrabass BXL3000, Fender Rumble 100, Ampeg BA115T, and the Ampeg B200R combo amps.

MPN: Basslite C2515
UPC: 876358000180

• Neodymium magnet for less weight
  
• Excellent in either sealed or vented enclosures
  
• Specifications
  
• Nominal Basket Diameter: 15"/381mm
  
• Impedance: 4 ohms
  
• RMS Power Rating: 300 Watts
  
• Frequency Response: 52Hz-2.5kHz
  
• Sensitivity: 98dB SPL
  
• Voice Coil Diameter: 2.5"/63.5mm
  
• Net Weight: 5.7lbs./2.6kg.
  
• Shipping Weight: 8.6 lb./3.9 kg
  
• Rec. Enclosure Volume (Sealed): 1.6-2.9 cu.ft./45-82 Liters
  
• Rec. Enclosure Volume (Vented): 3.0-4.2 cu.ft./85-119 Liters
  
• Thiele & Small Parameters
  
• Resonant Frequency (fs): 38Hz
  
• DC Resistance (Re): 3.72
  
• Coil Inductance (Le): 0.39mH
  
• Mechanical Q (Qms): 4.7
  
• Electromagnetic Q (Qes): 0.5
  
• Total Q (Qts): 0.45
  
• Compliance Equivalent Volume (Vas): 260 liters/9.2 cu. ft.
  
• Peak Diaphragm Displacement Volume (Vd): 381cc
  
• Mechanical Compliance of Suspension (Cms): 0.26mm/N
  
• BL Product (BL): 11.1 T-M
  
• Diaphragm Mass inc. Airload (Mms): 70 grams
  
• Efficiency Bandwidth Product (EBP): 76
  
• Maximum Linear Excursion (Xmax): 4.5mm
  
• Surface Area of Cone (Sd): 856cm2
  
• Maximum Mechanical Limit (Xlim): 8.5mm
  
• Mounting Information: Recommended Enclosure Volume: Sealed - 45-82 liters/1.6-2.9 cu.ft.; Vented - 85-119 liters/3-4.2 cu.ft.
  
• Overall Diameter: 15.32", 389.1mm
  
• Baffle Hole Diameter: 14.0", 355.6mm
  
• Front Sealing Gasket: fitted as standard
  
• Rear Sealing Gasket: fitted as standard
  
• Mounting Holes Diameter: 0.28", 7.0mm
  
• Mounting Holes B.C.D.: 14.56", 369.9mm
  
• Depth: 6.9", 175mm
  
• Net Weight: 5.7 lb., 2.6 kg
  
• Shipping Weight: 7.9 lb., 3.6 kg
  
  
• Materials of Construction
  
• Copper voice coil
  
• Polyimide former
  
• Neodymium magnet
  
• Vented core
  
• Die-cast aluminum basket
  
• Paper Cone
  
• Cloth cone edge
  
• Solid composition paper dust cap
  
  
• *Please inquire about alternative impedances.
  
• **Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, non-temperature controlled environment.
  
• ***The average output across the usable frequency range when applying 1W/1M into the nominal impedance. Ie: 2.83V/8 ohms, 4V/16 ohms.
  
• Eminence response curves are measured under the following conditions: All speakers are tested at 1w/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle | 2ft. X 2ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction | Hafler P1500 Trans-Nova amplifier | 2700 cu.ft. chamber with fiberglass on all six surfaces (three with custom-made wedges)