The Fuzz Probe is a kind of cross between a theremin and a fuzz factory. There is a 3 5/8" antenna plate mounted on a chunk of 3/8" clear acrylic that passes over the top of the ped- al housing, angles down to sharp turn, and goes back to the pedal. Under the whole mess is a 3 5/8" by 7" sheet of alumi- num that provides shielding from annoying ground effects and wires under the stage. It also serves to protect the knobs from being knocked off if you drop it on them... and it makes a nice toe chopper if you are barefoot, so (legal disclaimer:) DO NOT DROP THIS PEDAL ON YOUR FOOT! IT IS HEAVY AND HAS VERY POINTY CORNERS THAT COULD DAMAGE LIVING CREATURES AND FINE HARDWOOD FLOORING. ALSO, YOU COULD BREAK SOMETHING. Like your dog.
WHAT DOES THIS PEDAL DO?
Already, it should be apparent that this is the most dangerous pedal I have ever made. Ow! The antenna plate projects a field of RF energy that is affected by your foot (or other appendage), al- tering the circuit that generates it, and in so doing, increasing the brightness of that LED on the top of the pedal and also controlling the STABILITY (STAB) knob on the back. I could have made it just control that LED, I mean, that's enough for some people, but nooo, I went and connected it to the stability knob too. This lets you select your favorite squealy Fuzz FactoryTM setting (doesn't the band love that?) and then mess around with the STAB knob with your foot and create little melodies and interference modulations with your guitar (doesn't the band love that even more?).
MPN Vexter Fuzz Probe 1 1
Vexter Fuzz Probe
- How does one get it to do something interesting? Well now, that's a fine question. Let's say you set the knobs (face them straight on to do this) to vol=9 o'clock, gate=7 o'clock, comp=10 o'clock, drive=noon, and stab=7 o'clock.
- By the way, to get the widest range for the probe control, be sure to leave the stab knob on 7 o'clock. The probe adjusts the stab knob from wherever it is set, upwards toward the most clockwise position as you get closer to the antenna.
- If you set the stab knob more clockwise, say, to select a favorite pitch to start from, the probe will let you raise that pitch up to the top as you get closer.
- If you put the stab knob at the top, at 5 o'clock, all the way up, the probe will do NOTHING. That's cause it is made to adjust that knob from WHEREVER IT IS SET to the TOP, and if it is already at the top, then no adjustment takes place.
So you might start with those settings and then follow these rules:
- 1) Plug in (input and battery switch is on right). Turn your guitar volume slightly down. Just a little.
- 2) Make sure your guitar cords are AWAY from the antenna. They will mess with the probe just like your foot does.
- 3) The pedal will be squealing (if it's not, stomp on it until it is.) You can adjust the pitch of the squeal with your foot.
- 4) Use the volume control on your guitar to adjust the blend of the pitch effect and guitar fuzz.
- 5) Noodle with the settings (other than the volume control, they all affect the pitch and tone).
Description$399.00 Add to cart
Wireless MIDI Guitar Controller
Description$99.99 Add to cart
Wi-Tune Wireless Chromatic Tuner with two multi-instrument clips
Description$79.99 Add to cart
Molded Polyethylene Pedalboard and Carrying Case
Description$29.95 Add to cart
AC & Cable Pedal Combo Pack
Description$24.95 Add to cart
Gold Instrument Pedal Cable
Description$10.95 Add to cart
10 foot Instrument Cable
Description$7.95 Add to cart
6 inch Guitar Patch Cable, Hosa Right-angle to Same