16 channel input expander for digital and analogue signals. Dual rear panel DB25 connectors (8 channels per connector) for line level signals, 2x8 channel digital inputs (TOSLINK) in ADAT format (24-bit).

You can configure odd-even channel pairs in dual mono or stereo, name the inputs and add 6dB or 12dB gain from any myMix on the network. Channel names and configurations are stored within the IEX-16L.The IEX16L-A can also be locked. Front panel dual color signal LED indicators per channel. Includes power supply (identical to myMix). 1RU. Multiple IEX16L-A can be used on a system.

To use a MADI signal stream we recommend the RME ADI-648 MADI to ADAT interface.

MPN: IEX16LA

• 16 Balanced Line Level Inputs on two DB25 Connectors
  
• 16 Digital Inputs on ADAT Optical Connectors
  
• Adds 16 Channels to myMix System in a 1U, 19-inch package
  
• Independent Audio Channel Selection on every myMix unit
  
• Convenient Signal Feed from a Mixing Console or External Microphone Pre-Amps
  
• Individual Digital Gain Adjustment (0dB, +6dB, +12dB) per Input Channel
  
• Can be combined with other myMix Input and Output devices
  
• Configuration of IEX-16L-A from any myMix in the network or through the dedicated Configuration Port
  
• Works with 100MBps Fast Ethernet Switches
  
• Allows the Use of multiple IEX-16L-A with unlimited Audio Channels on Network*
  
• Ethernet AVB ready (IEEE1722 protocol)
  
• Inputs: 16
  
• Input Impedance: 20 kΩ, balanced
  
• Maximum Input Level: + 20 dBu
  
• Input Gain Adjustment (digital): 0dB, +6dB, +12dB
  
• Frequency Response: 20Hz - 20 kHz (-1dB)
  
• Signal to Noise Ratio: > 104dB
  
• THD+N: < 0,022%
  
• Network Type: 100MBps Fast Ethernet
  
• Network Cabling: CAT5/CAT5e
  
• Network Connection: 2 RJ45, (1 network, 1 myMix)
  
• Network Switch for 16ch max.: naged 100BASE-TX, Full-Duplex
  
• Network Switch for > 16ch: unmamanaged 100BASE-TX, IGMP snooping (v2)
  
• Audio Channel Limit on Network: max of mulicast groups handeled by the switch x 2
  
• AD/DA Conversion: 24-bit, 48kHz
  
• Input Connectors: DB25 (8 channels) standard pin out, ADAT Optical
  
• Dimensions (W x H x D): 483 x 44 x 146 mm (19" x 1.75" x 5.")
  
• Net weight: 2,7 kg (6 lbs)
  
• Accessories: external PSU for IEX-16L, 100V to 240V (50/60Hz)