iTrack Dock Studio Pack contains everything you need to plug your instruments straight in and easily record with legendary Focusrite sound on any lightning-compatible iPad®

Focusrite Sound with iPad Simplicity
To start recording on iPad with exceptional quality 24-bit audio and sample rates of up to 96kHz, simply dock your iPad, connect the microphone and headphones, plug your instruments in and hit record.

The unique halos around the gain knobs turn from green to red if you get too loud, while the high headroom instrument input helps you get a clean recording every time.

Officially Made for iPad
iTrack Dock Studio Pack works with any sized lightning-compatible iPad. The dedicated iPad audio interface will charge your iPad, power a USB device and integrate with almost any class compliant USB MIDI controller, all without the need for a USB hub or camera connection kit.

Everything You Need for Recording on iPad
The large diaphragm condenser microphone is ideal for recording vocals and comes an XLR lead and stand clip, so you can set up straight away.

The professional closed-back headphones are specifically designed for recording and mixing your performances. They block out any distracting outside noise and let you really concentrate on your music.

You can also download our free iPad recording app, Tape by Focusrite. iTrack Dock works with any recording app, but we think ours is by far the simplest and most versatile.

MPN: iTRACK DOCK STUDIO PACK
UPC: 815301008309

• Sleek iPad audio interface with two award-winning microphone preamps
  
• Large diaphragm CM25 condenser microphone
  
• Professional closed-back HP60 headphones
  
• High quality three metre XLR cable
  
• Class compliant USB cable
  
  iTrack Dock Studio Pack HP60B Headphones
  
• Reference quality headphones
  
• Extended frequency response
  
• Adjustable fit
  
• Closed back design to prevent audio spill when recording
  
• Mini-jack to 1/4" jack adapter included
  
  iTrack Dock Studio CM25B microphone
  
• Large-diaphragm condenser microphone
  
• 3 m red cable included
  
• Mic stand adaptor
  
  iTrack Dock
  
• USB MIDI Port
  
• MIDI controllers we have tested with iTrack Dock's MIDI port:
  
• Novation Launchpad S
  
• Novation Launchkey range (mini, 25, 49, 61)
  
• Novation Impulse range (25, 49, 61)
  
• Novation Launchpad mini
  
• Novation Launch Control
  
• Novation SL MkII range (25, 49, 61) Please note, the Novation SL MKII range needs external power to work with the iTrack Dock
  
• Akai MPK mini
  
• M-Audio Oxygen range (25, 61)
  
• M-Audio Axiom Air mini
  
• Alesis Q49
  
• Alesis QX61
  
• Akai Max 49 Please note, the Akai Max 49 needs external power to work with the iTrack Dock
  
  Known incompatible controllers
  
• Korg microkey 37
  
• Korg MS20ic
  Please see this answerbase article for further information on compatible MIDI controllers.
  
  
• Analogue Input Performance - Mic
  
• Frequency Response 20Hz - 20kHz +/- 0.2 dB (minimum gain)
  
• THD+N < -99dB (minimum gain, -1dBFS input with 20Hz/20kHz bandpass filter)
  
• Equivalent Input Noise (EIN) < -125dBu CCIR-RMS (measured at maximum gain with 150 ohm termination)
  
• Gain Range -4dB to +46dB (dBFS / dBu) ±1dB
  
• Max Input Level >+4dBu (at 1% THD)
  
• Analogue Input Performance - Line
  
• Frequency Response 20Hz - 20kHz +/- 0.2dB (minimum gain)
  
• THD+N < -98dB (min gain, -1dBFS at output and 20Hz/20kHz bandpass filter)
  
• Noise (NiPoS) <-104 dBFS CCIR-RMS (measured at min. gain with 50 ohm termination)
  
• Gain Range -22dB to +28dB (dBFS / dBu) ±1dB
  
• Max Input Level >+21dBu (at 1% THD)
  
  Analogue Input Performance - Instrument
  
• Frequency Response 20Hz - 20kHz +/- 0.2dB (minimum gain)
  
• THD+N <-90dB (min gain, measured at Max Input Level -1dB, 20Hz/20kHz bandpass filter)
  
• Noise <-104dBu CCIR-RMS (measured at min. gain)
  
• Gain Range -16dB to +34dB (dBFS / dBu) ±1dB
  
• Max Input Level >+14dBu (at 1% THD)
  
  Analogue Output Performance
  
• Nominal Output Level 0dBFS = >+10dBu, balanced
  0dBFS = >+4bBu, unbalanced
  
• Frequency Response 20Hz - 20kHz +/- 0.2dB
  THD+N < -100dB, balanced (0dBFS input 20Hz/20kHz bandpass filter)
  
  Digital Performance
  
• Clock sources Internal clock only
  
• D-A Dynamic Range 105dB 'A-weighted' (all outputs).
• Converter chipset D-A dynamic range 114dB
  
• Supported sample rates 44.1 KHz, 48 KHz, 96 KHz
  24 Bit
  
  Input Metering
  
• Ring LED lit Green Signal present (-24 dBFS)
  
• Ring LED lit Red Signal overload (0dBFS), peak held for approximately 1 second
  
  Weight and Dimensions
  
• Height 64mm
  
• Width 280mm
  
• Depth 168
  
• Weight 0.7 Kg