The EBS Red Twister Guitar Edition is an analog studio-quality chorus, flange, and pitch modulation effects pedal.

The pedal is built with some of the best analog processing circuitry available. This gives a smooth, warm and fat sounding chorus/flange effect, useful both for live and studio performances. The Red Twister is built on the legacy of the EBS UniChorus Studio Edition bass effect, but with adjustments of delay times and frequency range to match the guitar perfectly. The pedal output can run in mono or stereo.

Under the hood of the Red Twister, there's a mix level control that lets you decide how much or little of the effect you'd like to be blended with the original tone. See the manual (located under the "Documentation" tab) for details.

The Red Twister Guitar Edition is one of the three first launched pedals in EBS' Red Label Pedals for guitar, along with the EBS DynaVerb Guitar Edition and MultiComp Guitar Edition. They all comes with the heritage from EBS famed Black Label Pedals for bass, that have been used by world-famous guitarists for years. With the Red Label Pedals, all the details has been adjusted for optimal performance with guitar, with the input from some of the most busy Swedish session guitarists and the staff from the famous TGT11.se pedal specialists store in Stockholm, Sweden.

MPN: RT-GE

• Optimized for use with guitar
  
• Suitable for live and studio use
  
• Analog Signal Processing
  
• Flanger, Pitch Mod, and Chorus modes
  
• Controls for Depth and Speed
  
• True Bypass Signal Relay Switching
  
• Protected against over voltage up to 18V
  
• Powered by 9 to 12V DC
  
• Optional (not included): EBS AD-9+ Power Supply
  
• Nominal Input Level: -8 dBv
  
• Input Impedance: 700 kohms
  
• Bypass Bandwidth (+0 / -3 dB): 20 Hz - 20 kHz
  
• Delay Bandwidth (+0/-3dB): 200 Hz - 8 kHz
  
• Delay Level mix (min/max): -oo - +3 dB
  
• Center Delay Time:
  
• Flange: 1.5 ms
  
• Chorus: 2.8 ms
  
• Pitch Modulation: 4.1 ms
  
• Modulation Depth (min/max): +/- 50% of nominal delay time
  
• LFO Range (min/max): 0.15 - 7.5 Hz
  
• Bypass: True Bypass
  
• Dimensions: 2.8" L x 4.5" W x 1.4" H (70 x 115 x 35mm)
  
• Weight: 0.88 lb (400 g)
  
• Power Requirements: 9-12 V DC Regulated, 35 mA max*
  *EBS recommends the use of the EBS AD-9+ DC adapter. The adapter can supply up to twenty pedals at the same time.