The E15 is a trapezoidal, two-way loudspeaker using a 15-inch, 500W, die cast aluminum frame woofer with a 3.5-inch voice coil. It is intended for use when high-power and authoritative low-end are needed from a full-range loudspeaker. A 2.8" compression driver attached to the 75° DMTTM waveguide assures that even distant listeners will be well covered.
E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today's powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.

MPN: E15

• High output, professional quality sound with E15 – 500 W continuous power
  
• E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers.
  
• E Series Entertainment System DSP Tunings are now available for PLD, CXD and GXD processing amplifiers:
  
• For PLD/CXD visit Amplifier Navigator Software
  
• For GXD visit the GXD Firmware Updater
  
• Titanium diaphragm for high fidelity and long life
  
• Rugged tour-grade textured paint
  
• Foam-lined perforated steel grill
  
• Available U-Style Yoke and M8 rigging kit for permanent installation
  
• Dual angle pole socket
  
  
• Model E15
  
• Configuration 1 x 15-inch, 2-way, non-powered
  
• Frequency Range (-6 dB) 55Hz – 20kHz
  
• Power capacity²: continuous/peak 500 W / 2000 W
  
• Sensitivity 97dB, 1W@1m
  
• Coverage Angle 75° conical DMT
  
• Output (peak SPL @ 1 m) 130dB
  
• Drivers
  
• LF 381 mm (15-inch) driver with 89 mm (3.5-inch) voice coil
  
• HF 38 mm (1.5-inch) exit, 71 mm (2.8-inch) voice coil, compression driver
  
• Nominal Impedance 8Ω
  
• Cross-over Full-range only 1.55kHz
  
• Input connectors 2x NL4, 1 x barrier strip
  
• Enclosure Trapezoidal, plywood, black texture paint finish.
• Two side-mounted handles, Perforated, powder-coated steel grille with foam lining.
  
• Mounting and suspension 6 x M8 suspension points, dual angle, 35mm pole-socket
  
• Net weight 31 kg / 68 lbs
  
• Shipping weight 34 kg / 75 lbs
  
• Dimensions (WxHxD) 420x716x445mm, 16.5x28.2x17.5in