THE EBS OCTABASS STUDIO EDITION ANALOG OCTAVE DIVIDER CREATES A SINGLE NOTE ONE OCTAVE BELOW THE PITCH OF THE PLAYED NOTE, ADDING A NEW DIMENSION TO YOUR SOUND.

Track your note. The pedal recognizes two or three-note chords and trigger the lowest note. Control the level of the original tone and mix in the octave effect. Choose between High, Mid or Low Range - which relates to the character of the sound of the sub-note.

Hints. Sub-notes are perhaps most effective when playing on the higher frets, and could add a nice touch just slightly blended into the original tone, especially on a solo on bass or guitar. The OctaBass works really good together with distortion as well, but remember to keep the OctaBass before the drive in the signal chain, so it get's as clean as possible tone to trigger. If you are after a synth-bass type of sound, a great way to achieve that is to run an OctaBass, combined with an EBS BassIQ envelope filter, and use the ‘Down'mode on the IQ. That makes the impression of hitting a key on a keyboard, and adds that sub-bass as well as synth sound to the tone.

The original EBS effect! The OctaBass was the very first stompbox effect from EBS. This classic effect was introduced in 1992, and based on an onboard effect featured in the legacy EBS Taurus combo. It has become 'classic' after being a trusted companion to legendary bassists like Tony Levin, Roger Glover, Marcus Miller, Tal Wilkenfeld & many many more...

The Studio Edition comes with optimized signal path, new design, new signal relay switching technique, protection against overvoltage use up to 18V and the possibility to power the pedal with anything from 9-12V DC.

MPN: EBS-BE-OC

• Preserve the low range
  
• Suitable for live and studio use
  
• Triple Mode Octave Divider
  
• High, Mid and Low Ranges
  
• Controls for Normal and Octave volume
  
• True Bypass Signal Relay Switching
  
• Protected against over voltage up to 18V
  
• Powered by 9 to 12V DC
  
• Optional (not included): EBS AD-9+ Power Supply
  
• Nominal Input Level -8 dBv
  
• Input Impedance 700 kohms
  
• Dry Bandwidth +0 / -2 dB 20 - 20k Hz
  
• Dry Level min / max -oo / 0 dB
  
• Dry Noise Level -96 dBv
  
• Octaver Bandwidth +0 / -3 dB 10 - 110 Hz
  
• Octaver Level Gain min / max -oo / 12 dB min
  
• Octaver Filter Slope 18 dB/oct. Low pass
  
• Low Pass Triggering Threshold -70 dBv @200 Hz
  
• Dimensions (L x W x H) 2.8 x 4.5 x 1.4" (70 x 115 x 35 mm)
  
• Weight 400g (0.88 lb.)
  
• Bypass True Bypass
  
• Power Requirements 9-12 V DC Regulated, 30 mA max
  
  * EBS Recommend the use of the EBS AD-9+ DC adapter.
  The adapter can supply up to twenty pedals at the same time.