The Shure BETA 58A is a high output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It maintains a true supercardioid pattern throughout its frequency range. This ensures high gain before feed-back, maximum isolation from other sound sources, and minimum off-axis tone coloration. The BETA 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille. Typical applications for the BETA 58A include lead vocals, backup vocals and speech. Features: Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect, Uniform supercardioid pattern for high gain before feedback and superior rejection of off-axis sound, Neodymium magnet for high signal-to-noise output, Hardened steel mesh grille that resists wear and abuse, Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration, Minimally affected by varying load impedance, Legendary Shure quality and reliability.

MPN: Beta58aPac
UPC: 000888885058

Beta 58a
- Type: Dynamic (moving coil)
- Frequency Response: 50 to 16,000 Hz
- Polar Pattern: Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency
- Impedance: Rated at 150 ohms (290 ohms actual) for connection to microphone inputs rated low Z
- Output Level (at 1,000 Hz)
- Open Circuit Voltage: -71.5 dB* (0.27 mV)
- *0 dB = 1 v/microbar
- Hum Pickup (at 60 Hz): Maximum 15.0 mV in 10 oe field, Maximum 26.5 dB equivalent SPL per 1 moe
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
- Case: Silver blue enamel-painted die cast metal with hardened, matte-finished, spherical steel mesh grille
- Connector: Three-pin professional audio connector (male XLR) Swivel Adapter Slip-in, adjustable through 180 degrees, with standard 5 / 8 "-27 thread
- Net Weight: 278 grams (9.92 oz)

Boom Mic Stand
- Solid cast end with standard 5/8-27 threads
- Long 36" boom with molded plastic counterweight
- Euro-Style boom with separate clutches for length and angle of boom. Allows user
to make one-handed adjustments of boom angle while performing
- Professional quality die-cast zinc clutch locks vertical shaft at any height from 36 - 63"
- Clip-on cable holder
- Steel-reinforced plastic leg housing offers less weight and exceptional strength
- Folding legs with plastic endcaps for durability and reduced floor vibration. Base spread: 23"

20ft Lo-Z Cable
- XLR-XLR-microphone cable
- 24 gauge RSMCA mic cable
- 95% shielded
- Low impedance
- Amphenol connectors
- Lead Cadmium Free Jacketing