Space saving, compact drum and brass microphone. Ideal for low visibility, close miking techniques.
The frequency response and cardioid pick-up pattern are optimised for drum sets and other percussion instrument miking, whilst also producing exceptional results on all forms of brass and woodwind. An integral stand mount screws directly onto mic stands and included clip attaches mic to rim of drum.

Very high sound pressure level handling, in excess of 160dB, is combined with a balanced, clear, low distortion signal similar to a high-end studio condensor microphone. Lightweight voice coil provides extended high frequency and rapid transient response. A tough reinforced glass fibre body takes the knocks and shocks and suppresses impact noise.

MPN: E604
UPC: 615104045194

Frequency response 40Hz...18kHz
Transducer principle Pressure gradient receiver
Pick-up pattern Cardioid
Front-to-back-rejection at 1kHz
at 120 degrees >25dB
Sensitivity (free field, no load) 1kHz 1.8mV/Pa = -55dB (0dB=1V/Pa)
1.8mV/Pa = -75dB (0dB=1V/mbar) (USA)
Nominal impedance at 1kHz 350 ohms
Min. terminating impedance 1000 ohms
Sensitivity to magnetic field at 50Hz 1 µV/µT
Weight 60 g
Dimensions Ø 33 x 59mm
Delivered with pouch and drum clip