The Lehle LTHZ is a ferrite core transformer consisting of two coils with very high inductivity with minimal scatter. It is ideal for the galvanic isolation of high-impedance signals.


1 The input signal should be fed into this jack. The Lehle P-Split operates purely passively. The input signal remains continuously connected to outputs A and B with no semiconductors or any other active component in the signal path.

2 The input signal and its ground are directly present on jack B.

3 This switch can be used to rotate the phase of the input signal on output A through 180. Shifting the phase may help if phase cancellations have a negative effect on signal reproduction.
4 Pressing this switch connects the grounds of outputs A and B.

5 The input signal is present on jack A, electrically isolated by the Lehle LTHZ (7) high-end transformer.6 The base of the Lehle P-Split can be secured without difficulty. First remove the four housing screws for the cover, and then screw the base of the switch to a base-plate using the two screws supplied with the unit, the washers and the spacer elements.

7 The Lehle LTHZ is a ferrite core transformer consisting of two coils with very high inductivity with minimal scatter. It is ideal for the galvanic isolation of high-impedance signals.

MPN: P-SPLIT

• Gold-plated switches
  
• Lehle LTHZ transformer
  
• No hum loops
  
  
• Weight: 420 g
  
• Length: 3.5"
  
• Width: 3.6"
  
• Overall Height: 1.5"
  
• max. Level: +20 dBU
  
• THD: <0,4 % @ +20 dBU/ 40 Hz
  
• Fequencyresp.: 30 Hz - 20 kHz -0,3/ +0,8 dB (Source 600 Ohm, Loud 1MOhm